SuperBlue printable PDF info sheet

A Penetrating concrete cleaner and renovator that quickly dissolves lime deposits, scale, rust, mortar, algae and mud stains from concrete interior or exterior without the dangers of raw Muratic acid.
Environmental Impact: SuperBlue™ contains no hydrofluoric acid, ozone depleting solvents or heavy toxic metals or chromate.
Applications: SuperBlue™ is the safe replacement for Muratic acid to clean concrete, tile, brick, and even glass and aluminum frames to remove lime, scale, excess mortar, algae and stains prior to sealing or acid staining of the concrete. This product helps to prepare concrete to insure reaction and penetration of our acid stains. Also insures better bonding of spray textures and overlay applications.

  • The safe replacement for Muratic acid: SuperBlue™ produces no harsh or irritating fumes even in interior areas where raw Muratic acid produces choking and corrosive fumes.
  • Will not burn concrete: SuperBlue™ can be used at full strength on difficult stains and will not degrade the concrete surface or interfere with acid staining of the concrete.
  • Fast action: SuperBlue™ works fast and efficiently with deep penetrating action that lifts off stains with a minimum of effort and no excess product wasted.
  • Economical: Because it is a strong surface active penetrate rather than a harsh strong acid, SuperBlue™ does the job faster, with less labor and less product. You save all around.
  • Will not attack most metals: Most of the metal encountered on the job will be either steel or aluminum. SuperBlue™ is highly inhibited against attack on these metals. It will brighten copper and brass, but will not corrode them if washed off. It should not be used on magnesium, galvanized metal or stainless steel. Test plastic laminates before using SuperBlue™ on them.
How to Use:
  1.   Polyethylene or similar plastic sprayers and buckets are recommended for application. Do not use Nylon brushes. For safety, always use goggles and protective gloves.
  2. Depending on the type of stain or soil, SuperBlue™ may be used full strength or diluted up to 1:3 with water.
  3. Apply SuperBlue™ by brush, spray or dipping. For spray, use a very coarse spray pattern to avoid inhaling the mist and causing over spray.
  4. Allow it to soak for several minutes. Agitate heavy soil or stains with a stiff broom, then rinse thoroughly with water. Repeat application may be required on some stains.
  • Type: Penetrating acidic detergent renovator.
  • Toxicity: Low-Do not take internally
  • VOC’s: Low
  • Flammability: Non Flammable
  • Composition: Biodegradable surfactants, inhibitors and acidic boosters.


All recommendations, statements, and technical data contained herein are based on tests we believe to be true and accurate. However, the reliability and completeness of said tests are not guaranteed and are not to be construed as a warranty, either implied or expressed. FABCRETE recommends that the user rely on his own information and tests to determine the suitability of the product for the intended use, and user assumes all risks and liability from their use of the product. Neither the seller nor the manufacturer shall be liable to the buyer/user or any third party for any injury, loss, or damage directly or indirectly resulting from the use of the product. Information contained herein is, to the best of our knowledge, true and accurate. Since the conditions and practices of use are beyond our control, Fabcrete disclaims any liability incurred in connection with the use of these products and information.

Buy with Confidence!

PayPal logo Questions or want more product information?

Call 256.547.7950 or email

Fabcrete Concrete Acid Stains

Turn Your Boring Concrete into FABCRETE!

We are looking for dealers interested in carrying the FABCRETE product line across the USA!
Contact us to find out more

We Ship Nationwide UPS & Conway Freight