GluGone printable PDF info sheet

A safe, nonflammable water based glue and mastic remover that effectively softens and removes most types of carpet adhesives and similar glue deposits.
Environmental Impact: Glu-Gone™ contains no chlorinated solvents, butyl solvents or phosphates and contains only biodegradable surfactants. Low VOC’s.
Applications: Glu-Gone™ can be used on all types of floor substrates that have glue deposits, and where water can be used in the final rinse. It will not interfere with the adhesion of new glue or mastics, or the use of coatings or stains.


  • Nonflammable-Noncombustible: Unlike most other glue removers, GluGone™ is not only nonflammable, but it will not support combustion even when soaked into rags or mops. It is much safer to use.
  • No harsh or unpleasant odors: Glu-Gone™ has a pleasant citrus like odor.
  • Emulsifiable: The Glu-Gone™ formula penetrates the mastic and softens it with emulsifying action so that after scraping off the bulk of the glue, the remainder can be easily washed off with water. A water wash will then leave the floor clean and ready to be re-coated with glue or any other treatment.
  • Fast and Easy: Just spray, mop or brush Glu-Gone™ over the mastic deposits to be removed, and let it penetrate for 20 to 45 minutes depending on the thickness and type of mastic. When the layer is softened, just scrape it off and rinse the floor. No further treatment is necessary.
  • Where the floor is to be stained, it is recommended that it be treated with SuperBlue™ to remove any imbedded material in the pours of the concrete.

How to Use:

  1. Apply Glu-Gone™ full strength by spray, mop or brush or pour on and spread with a broom to thoroughly cover and penetrate the mastic layer. For interior areas, use good ventilation.
  2. Allow Glu-Gone™ to soak for 20 to 45 minutes or until the mastic are easily scraped up. Heavy accumulations may require a second application.
  3. Scrape off the mastic and flush off any remaining residue with water.
  4. If the floor is to be stained, treat with SuperBlue™.


  • Type: Nonflammable, Emulsifiable glue and mastic remover.
  • Toxicity: Harmful if swallowed
  • VOC’s: ~160mg/L
  • Flammability: Nonflammable, Noncombustible
  • Composition: Water soluble citrus solvents and non-chlorinated solvents in a biodegradable surfactant solution.


All recommendations, statements, and technical data contained herein are based on tests we believe to be true and accurate. However, the reliability and completeness of said tests are not guaranteed and are not to be construed as a warranty, either implied or expressed. FABCRETE recommends that the user rely on his own information and tests to determine the suitability of the product for the intended use, and user assumes all risks and liability from their use of the product. Neither the seller nor the manufacturer shall be liable to the buyer/user or any third party for any injury, loss, or damage directly or indirectly resulting from the use of the product. Information contained herein is, to the best of our knowledge, true and accurate. Since the conditions and practices of use are beyond our control, Fabcrete disclaims any liability incurred in connection with the use of these products and information.

Buy with Confidence!

PayPal logo Questions or want more product information?

Call 256.547.7950 or email

Fabcrete Concrete Acid Stains

Turn Your Boring Concrete into FABCRETE!

We are looking for dealers interested in carrying the FABCRETE product line across the USA!
Contact us to find out more

We Ship Nationwide UPS & Conway Freight